Venmar Connaisseure C700 SERIES Installationshandbuch

C700 SERIESHB0116INTENDED FOR DOMESTIC COOKING ONLYINSTALLER: LEAVE THIS MANUAL WITH HOMEOWNER.HOMEOWNER: USE AND CARE INFORMATION ON PAGES 10 TO 12.R

1011. CAREBAFFLE FILTERS AND BOTTOM PANELThe baffle filters and the bottom panel should be cleaned frequently. Use a warm detergent solution.Remove ba

1111. CARE (CONT'D)GLASS PANELHot water with mild soap or glass cleaner is all that is usually needed.When using mild soap, rinse with clear wate

1212. OPERATION (CONT'D)C. MASTER ON/OFF: When blower and lights are off, press this button to turn the hood on to the last memorized speed leve

1313. WIRING DIAGRAMWARNING!Risk of electric shock. Electrical wiring must be done by qualified personnel in accordance with all applicable codes and

1414. SERVICE PARTSHL015112 3591012411687

15REPLACEMENT PARTS AND REPAIRSIn order to ensure your unit remains in good working condition, you must use Venmar Ventilation Inc. genuine replacemen

1615. WARRANTYVENMAR VENTILATION FIVE-YEAR WARRANTYVenmar Ventilation inc. warrants to the original consumer purchaser of the Venmar Connaisseur C700

2TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK OR INJURY TO PERSONS, OBSERVE THE FOLLOWING:1. Use this unit only in the manner intended by the manufactu

3TABLE OF CONTENTS1. I NSTALL DUCTWORK ... 32. PREPA

42. PREPARE INSTALLATIONNOTE: Before proceeding to the installation, check the contents of the box. If items are missing or damaged, contact the manu

53. PREPARE THE HOOD3.1 Lay the hood on a table. Use a piece of cardboard to avoid damaging the table or the hood. Remove tape on filters. Lift filt

64. INSTALL GLASS PANEL (WG MODELS ONLY)The WG hood models decorative glass panel is sold separately and has to be installed before completing the ho

75. INSTALL THE ADAPTER/DAMPER (ALL MODELS) (CONT'D)FOR HORIZONTAL DISCHARGE ONLY (CONT'D):Press the metal shutoff plate on a flat surface t

86. INSTALL THE HOODCAUTIONAfter a power failure or during the range hood power up, a 5-second booting sequence is executed. Wait for the control bac

98. REINSTALL BLOWER WHEELS AND BOTTOM PANELCAUTIONWhen reinstalling the blower wheels, make sure the small tab will fit into one hole of the motors.